RFID UHF tire tagCharacter
1.Standard:ISO 18000-6C, EPC Class 1 Gen2.
2.Frequency:860 to 960MHz.
3.Flexible construction to withstand tire deformation for the lifetime of the tire
4.Possibility to read and write user data into tag's EPC or USER memory
5.Factory programmed tag identification number to prevent cloning
RFID UHF tire tagApplication
Vehicle management , tire management
This tire tagis attached by a permanent adhesive with a special formulated dual cure chemical and heat process. It can be recapped several times.
It is designed for stick on the tire surface or inner surface. Used the file to have tire tag to be more rough, and then use tyre repair glue to paste on tag.
RFID UHF tire tagSpecification
1.Chip Type |
AlienH3
|
2.Protocol |
EPC Class1 Gen2/ISO 18000-6C |
3.Memory |
AlienH3:EPC-96bit,User Memory-512bit,TID-64bit, |
4.Environmental Specification |
Shelf life:10years Recommended: -25c to +230c Storage Condition: 20% to 90%RH Operating Temp: -40c to +230c |
5.Read/Write Times |
100000times |
6.Reading Range |
0-5M(according to the design of the antenna or reader) |
7.Working mode |
Passive |
8.size |
108*52*1mm |
9.wight |
13.6g |
Payment Terms︰ Paypal, T/T, Western Union
Packing︰ Normal packing